IBM AS400 / iSeries

Server snapshot provides an quick overview of current server's auxillary storage pool's usage in percentage, processing units' usage in percentage, permanent address usage in percentage, temporary address usage in percentage and interactive performance usage in percentage.

ASP Usage: The amount of hard disk capacity available in your system is called Auxiliary Storage Pool (ASP). This can be a deceiving number if you have more than one ASP defined on your system, because this number only reflects the System ASP. Applications Manager provides you with the percentage of disk storage in your System ASP that is currently used. If the percentage exceeds 90 percentage the system can fail. The performance of your AS400 server is affected if the percentage usage crosses 80 percent. You can create an alarm for this percentage and alert you whenever the percentage exceeds 80.

Permanent addresses percentage and Temporary addresses Usage: Applications Manager provides you the usage in percentage for the two addresses - Permanent and Temporary Addresses - which refer to the possible system addresses created for permanent and temporary objects in your AS400. Any variation in these values may reflect on rapid changed in the creation or destruction of objects in your AS400 at much rapid pace. This may affect the performance of your server.

Monitor Information

This provides general information about the AS400/iSeries server such as name of the server, current health of the server, type, system model, system serial, and latest polled values. In addition, it also displays system configuration details such as security level, version number, Previous System End, Auto Device Configuration, System Console, Job Message Queue Initial Size, Job Message Queue Maximum Size, Spooling Control Initial Size, Maximum Jobs Allowed, Password Valid Days and Query Processing Time Limit.

Provides the various job counts of various job types currently running in AS400/iSeries server. The information is displayed in a pie-chart with clearly distinction of each job types contribution to total job count. By default, the following services job count is displayed:

• Source PF system

• Spooled Writer
• System
• Spooled Reader
• Subsystem
• Autostart
• Interactive
• Batch

ASP Percentage

By default, there are four predefined storage pools:

*MACHINE

*BASE

*INTER and

*SPOOL

There are up to 12 user-definable storage pools available.

Pool Size

This displays the amount of memory assigned to each default pools such as *MACHINE, *BASE, *INTER and *SPOOL. You can also edit the amount of memory allocated for each pool by executing the Change Subsystem Description (CHGSBSD) command through Non- interactive Command available in Admin tab. Better allocation would help improve the performance of the server.

Reserved Size

This displays the pool's reserved memory allocation size. The information provided here gives better understanding to how much of the memory allocation has been used by jobs and how much memory is still unused. This reserved size can affect system performance. If insufficient memory is not provided to the default *MACHINE pool, then it can affect overall performance of your AS400 server. Hence monitoring this attribute becomes critical for maintaining better performance of your AS400 server.

This displays the DB and Non DB pages and fault for each pool. This bascially displays how program instructions and database information enter and leave the pool's memory. Monitoring this information provides better visibility on various programs and jobs that are being executed in AS400 server.

Displays the total number of jobs in clear, critical and warning states along with the health of each attribute. You can view jobs in clear, critical or warning state separately by click on the respective counts. For eg, if there are 25 jobs in critical state, the users can view these jobs alone by clicking on the number.

Also, from the pop up window, users can navigate through jobs which are in clear, critical or warning conditions using the Filter By option for the respective monitor. You can also navigate through the For Monitor drop down menu where all the AS400 monitors in APM are listed.

The line graph shows the percentage of jobs in clear, critical and warning condition out of the total number of jobs. The number of jobs collected from the server is set to 100 by default, which can be changed by the user by changing the values in AS400Server.properties file.

Displays a wealth of information on various jobs being executed in AS400 server. The user can sort jobs column-wise by clicking on the metric names. Each attribute is explained below.

Batch Job: The user name is specified on the Submit Job (SBMJOB) command, or it is specified in the job description.

Interactive Job: The user name is either typed in at signon or is provided by the default in the job description.

Autostart Job: The user name is specified in the job description referred to by the job entry for the autostart job.

You can enable or disable data collection for a monitor by clicking on the Enable/Disable Job button on the top right hand corner of the Job Details table.

If a user wants to monitor a specific job, they can add job(s) by clicking on the link Add Job(s) to Monitor. Users can also perform actions like END, HOLD and RELEASE from the Actions drop down list and Job(s) can be removed from monitoring by click on the Remove Job(s) link. These actions can also be performed from the double click mouse event.

Users can configure alarms to jobs by clicking on the configure alarm icon and create thresholds for THREADS, PRIORITY and STATUS of the jobs.

From the Add Job(s) to Monitor pop-up, you can fetch job details of currently running specific job/ all jobs, directly from the AS400 server. This will help you to add jobs to monitor even after disabling data collection for jobs.

Job Name

The name of the job as identified by AS400.

User

The system-assigned job number.

The type of active job. Possible values are:

• ASJ: Autostart

• BCH: Batch

• BCI: Batch Immediate

• EVK: Started by a procedure start request

• INT: Interactive o M36: Advanced 36 server job

• MRT: Multiple requester terminal

• PJ: Prestart job

• PDJ: Print driver job

• RDR: Reader

• SBS: Subsystem monitor

• SYS: System

• WTR: Writer Status

This displays the system-related pool from which the job's main storage is allocated.

Displays the name of the Queue where the job is located.

The following values may be shown:

• Completion: A message that conveys completion status of work.

• Diagnostic: A message that indicates errors in a system function, errors in an application, or errors in input data.

• Escape: A message that describes a condition for which a program must end abnormally.

• Information: A message that provides general non error-related information.

• Inquiry: A message that conveys information but also asks for a reply.

• Notify: A message that describes a condition for which a program requires corrective action or a reply.

• Reply: A message that is a response to a received inquiry or notify message.

• Request:A message that contains a command for processing by a request processor, such as command entry.

• Sender Copy: A copy of an inquiry or notify message that is kept in the sender's message queue.

Displays in-depth details for the particular message from your AS400 server. It displays the following values:

• Message ID

• Date Sent

• Alert Option

• Current User

• From Job Number

• From Program

• Reply Status

• File Name

• Message

• Cause

Displays the total number of jobs in clear, critical and warning states along with the health of each attribute. For eg, if there are 10 spool files in critical state and you want to view these spool files alone, you can do it by just clicking on the number.

Also, from the pop up window you can navigate through spooled files which are in clear, critical or warning using the Filter By options for that respective monitor. You can also do the same for other AS400 monitors through the For Monitor drop down menu where all the AS400 monitors in APM are listed.

The user can view spooled files in clear, critical or warning condition in all AS400 monitors by choose 'Show all' in 'For monitor' drop down and navigate through all monitors at a glance.

The line graph shows the percentage of Spooled files in clear, critical and warning condition out of the total number of spool files.The number of spooled files collected from the server is set to 100 by default, which can be changed by the user by changing the values in AS400Server.properties file.

You can enable or disable data collection for a monitor by clicking on the Enable/Disable Spool button on the top right hand corner of the details table.

The user can sort spools column-wise by clicking on the metric names.

The status of the spooled file. The following list of values is used to describe the file's status:

RDY (Ready) The file is available to be written to an output device by a writer.

OPN (Open) The file has not been completely processed and is not ready to be selected by a writer.

DFR (Deferred) The file has been deferred from printing.

SND (Sending) The file is being or has been sent to a remote system.

CLO (Closed) The file has been completely processed by a program but SCHEDULE(*JOBEND) was specified and the job that produced the file has not yet finished.

HLD (Held) The file has been held.

SAV (Saved) The file has been written and then saved. This file will remain saved until it is released.

WTR (Writer) This file is currently being produced by the writer on an output device.

PND (Pending) The file is pending to be printed.

PRT (Printing) The file has been completely sent to the printer but print complete status has not been sent back.

MSGW (Message Waiting) This file has a message which needs a reply or an action to be taken.

Specifies the status of the printer device. Valid values are:

Varied Off

Vary Off Pending

Vary On Pending

Varied On

Connect Pending

Active

Active Writer

Held

Powered Off

Recovery Pending

Recovery Canceled

Failed

Failed Writer

Being Serviced

Damaged

Locked

Unknown

Local mirroring status.

1 = active

2 = resuming

3 = suspended

Displays the total number of subsystems in clear and critical states along with the health of each attribute. For eg, if there are 4 subsystems in critical state and the users want to view those subsystems alone, he can do it by just a click on the number.

Also, from the pop up window you can navigate through subsystems which are in clear or critical state using the Filter By options for that respective monitor. You can also do the same for other AS400 monitors through the For Monitor drop down menu where all the AS400 monitors in APM are listed.

The user can view subsystems in clear, critical or warning condition in all AS400 monitors by choosing 'Show all' in 'For monitor' drop down and navigate through all monitors at a glance.

The line graph shows the percentage of subsystems in clear, critical and warning condition out of the total number of subsystems. The number of subsystems collected from the server is set to 100 by default, which can be changed by the user by changing the values in AS400Server.properties file.

Provides subsystem details like Name, Library, Current Active Jobs, Maximum Active Jobs and Status.

If a user wants to monitor a specific subsystem, they can add subsystem(s) by clicking on the link Add Subsystem(s) to Monitor. Users can also perform actions like START, END, DELETE and REFRESH from the Actions drop down list and Subsystem(s) can be removed from monitoring by a click on the Remove Subsytem(s) link. These actions can also be performed from the double click mouse event. You can enable or disable data collection for a monitor by clicking on the Enable/Disable subsystems button on the top right hand corner of the details table.

The user can sort subsystems column-wise by clicking on the metric names.

The number of jobs active in the subsystem. If more than one interactive job is started from the same work station (with system request or Transfer to Group Job), they are counted as only one job on this display.

Severity

• Completion: A message that conveys completion status of work.
• Information: A message that provides general non error-related information.

• Diagnostic: A message that indicates errors in a system function, errors in an application, or errors in input data.

• Escape: A message that describes a condition for which a program must end abnormally.

• Inquiry: A message that conveys information but also asks for a reply.

• Notify: A message that describes a condition for which a program requires corrective action or a reply.

• Reply: A message that is a response to a received inquiry or notify message.

• Request:A message that contains a command for processing by a request processor, such as command entry.

• Sender Copy: A copy of an inquiry or notify message that is kept in the sender's message queue.

This is the date when the log was sent.

The status of the job queue. The status may be one of the following values:

RELEASED - The job queue is released.

HELD - The job queue is held.

The status of the output queue. The status may be one of the following values:

• RELEASED - The job queue is released.
• HELD - The job queue is held.

The status of the spooling writer. The status may be one of the following values:

• Started
• Ended
• On job queue
• Held
• Message waiting

Message and Logging,

Network Attributes,

Date and Time,

System Control,

Library List,

Storage,

Allocation,

Security

Displays the job log for any job if you enter the job name, user, job number of the required job in the respective text boxes.